Our products
Facades
Acrimur
Acrylic thin film coating for waterproofing, decoration and durable protection of walls and ceilings, both indoors and outdoors. Finishing coating for exterior thermal insulation systems, SATE. Wide range of colours.
MicroQuarz Base
Ready-to-use single-component paste screed mortar for floors and walls.
MicroQuarz is an acrylic-polyurethane resin mortar with a cement-like appearance, ideal for the renovation of floors and walls. MicroQuarz is available in different granulometries, HardBASE, BASE, FINE and HardTRANSIT, and can be used both indoors and outdoors.
MicroQuarz
MicroQuarz Base
MicroQuarz Base is a ready-to-use, single-component, ready-to-use, paste screed mortar used as a first coat in our MicroQuarz wall coating system and as an intermediate coat for floors. MicroQuarz is an acrylic-polyurethane resin mortar with a cementitious appearance ideal for interior and exterior floor and wall renovation.
MicroQuarz Hard Base
MicroQuarz Hard Base is a ready-to-use, single component, ready-to-use, paste screed mortar used as the first coat in our MicroQuarz floor coating system. MicroQuarz is an acrylic-polyurethane resin mortar with a cementitious appearance ideal for interior and exterior floor and wall renovation.
MicroQuarz Hard Transit
MicroQuarz Transit is a ready-to-use, single-component, paste screed mortar used as an intermediate and finishing coat in our MicroQuarz Hard Transit floor coating system. MicroQuarz is an acrylic-polyurethane resin mortar with a cementitious appearance ideal for interior and exterior floor and wall renovation.
MicroQuarz Fine
MicroQuarz Fine is a ready-to-use, single-component, ready-to-use, paste screed mortar used as the final coat in our MicroQuarz wall and floor coating system. MicroQuarz is an acrylic-polyurethane resin mortar with a cementitious appearance ideal for interior and exterior floor and wall renovation.
MicroQuarz Hybrid
MicroQuarz Hybrid is a variant of MicroQuarz Fine, suitable for wet rooms or exteriors, always on walls that need to be protected and waterproofed. MicroQuarz Hybrid does not need to be varnished to make the product waterproof.
MicroQuarz Nature
It is formulated to create surfaces that look like polished concrete. No need to use coarse concrete.
You can also achieve textures, stencil designs and unique combinations of colours and metallics… that will make a difference on your walls and floors.
Masilla MicroQuarz
Decorative resins
Ànima
ÀNIMA is a highly breathable mineral grout for interiors and exteriors specifically designed to achieve a satin finish.
It is a product composed of marble particles of different grain sizes, slaked lime and other special additives to facilitate anchoring on any type of support.
Varnishes and Lacquers
Finish W TRP
Colorless varnish based on water-based resins, crosslinkable with isocyanates, with excellent resistance to abrasion, very good hardness, and chemical resistance; it does not yellow and can be applied outdoors or indoors.
It stands out mainly for its high chemical resistance, impermeability and surface hardness. It is mainly indicated for high traffic pavements that have to withstand chemical products such as detergents, chlorine, bleaches, etc., with high impermeability and excellent resistance to scratches and scratches.
Finish W TRP RADIANT
Two-component varnish based on hydroxylated acrylic resins and aliphatic polyisocyanate in aqueous medium. It is characterised by its high resistance to stains produced by certain common chemical products. It presents an extraordinary resistance to abrasion and a very easy cleaning of its surface. It is recommended as a finishing coat for flooring systems such as MicroQuarz, resins and various industries. It is also indicated as a coating for multi-purpose skating rinks in sports clubs, public institutions and educational centres.
High Decoration
Ànima Base Cal
ÀNIMA is a highly breathable mineral grout for interiors and exteriors specifically designed to achieve a satin finish. It is a product composed of marble particles of different grain sizes, slaked lime and other special additives to facilitate anchoring on any type of support.
Calce Lucida
CALCE LUCIDA is a product composed of quicklime and a higher quantity of micronised and selected marble powders that have various types of finish depending on the various types of processing. Thanks to the particular natural ingredients used, it has a high degree of breathability and excellent resistance to alkalis.
Gel Metallic Effect
Thixotropic coating for walls and floors, to be used as a decorative element on indoor surfaces. Gel Metallic Effect is a single-component agramase made with water-based polyurethane resin, thixotropic agents and metallised mica particles. It can be used as a decorative effect glaze, mixing colours or applied undiluted with a trowel as a metallic stucco. Gel Metallic Effect is a waterproof coating for walls and floors subsequently protected with Finish W TRP on walls or Finish W TRP Radiant on floors.
MetalQuarz
Ready-to-use single-component paste screed mortar for interior floors and walls. MetalQuarz is a mortar made of polyurethane resin, metallised mica and quartz, ideal as a complement to the MicroQuarz Classic, Hard Transit, Nature or Hybrid systems with which, with the correct colour mix, metallic colour shades and rust effects can be achieved for the renovation of interior floors and walls. MetalQuarz should be protected with Finish W TRP on walls or Finish W TRP RADIANT on floors. Apply MetalQuarz as a decorative coat prior to the application of varnish protection. It can be applied over any of the MicroQuarz products.
Primers
Primer Finish
One-component primer in aqueous dispersion acrylic-polyurethane aliphatic polyether based. Easy and quick to apply by roller or brush. Very good anchorage on different types of substrates (concrete floors, microcement, rasilla catalana, etc.). Suitable as a primer for transparent sealing outdoors, does not yellow due to UV rays. Not recommended as a finish.
Primer AH
Two-component, solvent-free, 100% solids epoxy resin-based primer. It is used to ensure adhesion between the mineral substrate and the subsequently applied resin coating. Among its properties it is suitable for regularising the absorption of the substrate and contributing to the correct installation of MicroQuarz, and for applications on substrates with residual moisture. Not suitable for substrates with phreatic humidity.
PrimerQuarz
It is a water-based resin, with excellent adhesion on any surface with little or no porosity, and a permanent residual tack that ensures adhesion between coats. It has a high elasticity, maintaining this property for long periods of time with a high resistance to water and alkalis, making it excellently resistant to different atmospheric conditions.
Primer AC
It is a product composed of acrylic resin, titanium dioxide, quartz and calcium carbonate.
This material is characterised by good deep penetration of the substrate and is highly resistant to alkaline attack in urban, rural, marine and industrial environments.
It is particularly effective for preparing a background to match the finish and to create a rough substrate with improved adhesion for trowelled finishes.
Industrial resins
Finish W TRP RADIANT
Two-component varnish based on hydroxylated acrylic resins and aliphatic polyisocyanate in aqueous medium. It is characterised by its high resistance to stains produced by certain common chemical products. It presents an extraordinary resistance to abrasion and a very easy cleaning of its surface. It is recommended as a finishing coat for flooring systems such as MicroQuarz, resins and various industries. It is also indicated as a coating for multi-purpose skating rinks in sports clubs, public institutions and educational centres.
Concrete Paint
ConcretePaint is a two-component cement-based paint, consisting of a can of cement-based powder, special aggregates of high hardness and resistance plus a coloured resin mixture, breathable and high hardness coating.
It can be supplied in different particle sizes to achieve more or less anti-slip, there are three particle sizes, coarse, medium or fine, the coarser the particle the more anti-slip.
If you already have a project or need to know the prices.
Fill in this form and we will send you a quote.